Hueforge Charizard
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D printed Hueforge charizard pokemon Card Base set
- Rating
- 5 / 5
- Likes
- 31
- Downloads
- 184
- Makes
- 1
- Views
- 1,164
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
DO NOT CHANGE THE Z HEIGHT OF THE PRINT. You may change X or Y, but keep Z height the same.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 177.28x245mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Scarlet Red Transmission Distance: 2
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 4 unique filaments
Swap Instructions:
Start with Charcoal
At layer #17 (1.44mm) swap to Scarlet Red
At layer #21 (1.76mm) swap to Lemon Yellow
At layer #23 (1.92mm) swap to Ivory White for the rest.