1 / 3
Google Hub in-wall mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an in-wall mount got the Google Hub (5 inch)
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 30
- Makes
- 0
- Views
- 328
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
You will need (4) #8-32 machine screws approximately 1 1/2 inches long for the dog ears
Wall cut out size is 4 5/8 x 6 1/8
There is a gap at the bottom of the hub that exposes 2 of the screws. This gap allows the sound from the hub to be a little more clear.
There are no clamps or tampering of the hub needed. It is a pressure fit. Slide in the base of the hub first, then slow push the edges of the screen into place.
No supports are needed. Would suggest a brim around the dog ears depending on bed adhesion.