Creality CR5 Magnetic Bed Wiring Harness
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bed wiring harness for the CR5 that attaches to the build plate frame with magnets.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 21
- Makes
- 0
- Views
- 163
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
I was never really happy with the pinching solution to secure the bed wiring harness to the build plate frame. It does work well and I have never had the harness come off but its definitely not super secure. Recently I was working on another project for my CR5 when I discovered that the build plate frame is ferromagnetic. This gave me the idea to use magnets to secure the bed harness. The magnets are super strong and the bracket is far more secure than my previous design. The down side is that you have to have 4 magnets.
Materials I used:
- 4x 6mm diameter 2mm thick magnets. The same ones used for gridfinity.
- 2x zip ties
The magnets are on Amazon: https://www.amazon.com/dp/B08WLT3PHD
I like to place the magnets so that they are flush with the edge of the bracket, then I add glue into the smaller hole on the opposite side of the bracket to secure them.