1 / 3
Thrustmaster T300RS IEC C14 Power Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This file allows to mount the IEC C14 Power Adapter to the enclosure of the T300RS/GT.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 44
- Makes
- 0
- Views
- 606
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- GNU General Public License v3.0
This model can be printed facing up with NO supports. Print time around 20mins on a P1S with 4 walls.
You can pretty much use any setting you want.
There are 2 types. Type1 will not fit the original enclosure bracket as it's not tall enough, and so modifications have to be made. Otherwise, type2 can be used to just have the cable pass through and have the IEC further ahead to not hit against the bracket. Superglue can be used between the bracket and the IEC connector to make it one assembly.