RV Faucet Wrench
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed to disassemble my RV Faucet and noticed the inside part had an odd 12-point design to it - like a giant TORX…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 31
- Makes
- 0
- Views
- 386
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I needed to disassemble my RV Faucet and noticed the inside part had an odd 12-point design to it - like a giant TORX bit.
I didn't have one - and thought a simple plastic print would be more than strong enough to turn the threads.
It worked perfectly - I printed a small 5mm test piece to make-sure it fit - then printed the full tool. Quick 30-minute print and I had the faucet apart.
Diameter of 12-point "bit" is about 15.8mm, which is close to 5/8".
I printed with 30% infill and 5 perimeters - it was plenty strong enough for the plastic threads on the faucet.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
.2
Infill:
30
Filament:
Prusament PETG Orange
Category: Hand Tools