NATO Metric (Picatinny/STANAG 4694) rail
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parametric Picatinny/NATO metric rail for inclusion in other projects.
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 292
- Makes
- 2
- Views
- 2,580
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Picatinny/NATO metric rail for mounting accessories to various firearms.
Original design had an F3D file but base sketch was all blue (unconstrained) and I couldn't easily clean it up. Also noticed some decisions didn't match the drawing. Looks like there's a couple variations on the dimensions for these rails so you've got to choose which one to follow, and I'm sure all of them will work reasonably well.
I used the drawing found in this blog post which differs very slightly from the Wikipedia article, mostly in the slot width being 5.2mm vs 5.35mm. Both are consistent in the other dimensions.
Sharing several STL files, but the real thing here is the F3D file which should import directly into Fusion and allow you to drive the length parameter. For bars that end at the ends of the piece, use 10mm increments of 4.8mm - for example, 2 bars and one slot would be 14.8mm, 3 bars and 2 slots would be 24.8, on up with 34.8, 44.8, 54.8… and so on. Arbitrary lengths can be entered and created, the design will adjust for as many bars as can fit with partial slots at the end.
To open this in Fusion
- Download the F3D file
- In Fusion, with the data panel visible, choose the “Upload” button near the top
- Click “Select Files” and choose the downloaded F3D file
To modify the design
- NOTE: The only parameter designed to be directly edited is the length.
- Open the downloaded F3D in your Fusion data panel.
- Once it is open, choose “Modify” and “Change Parameters”
- The parameters window will open and you should see the one parameter “Length” marked as a favorite with a blue star.
- Change the length as desired and the design will recalculate.
Printing
This is more intended to be included in another design than to be printed directly, but if you're printing it, the settings and material you use would be dictated by where you're going to use it. On an airsoft gun or anything without recoil or shock, default draft settings would likely be fine, but for something that will see recoil or shock, you're going to need stronger material and heavier print settings.