IKEA OMAR Shelving Threaded Foot for Castors
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a foot cap for the IKEA OMAR wire shelving; useful for attaching threaded castors.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 84
- Makes
- 0
- Views
- 1,114
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution
This is the part of the IKEA OMAR shelving foot that slides over the pole. It is useful for attaching threaded castors.
Two versions are available. One with an M8 1.0 thread (same as the original part) and another with an M10 1.5 thread (useful for castors with larger threads).
The threads will likely print a little undersize and require tapping to clean them out.
.STEP and .F3D files attached in case a different diameter or thread pitch is required.
.GCODE included for MK3/S/S+. Suggest boosting print speed for a faster print. 150% to 200% seemed to work just fine.