Hidden Book Compartment
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple 2-part hidden book compartment, this model smoothly snaps together with a durable compliant mechanism.
- Rating
- 5 / 5
- Likes
- 93
- Downloads
- 612
- Makes
- 1
- Views
- 2,248
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
parts to print — 2
| part | quantity |
| cover | 1 |
| paper | 1 |
recommended filaments — PLA [cover], N/A [paper]
dimensions — 225L × ~170W × 45D overall; 180L × ~145W × 37.5D internal compartment [intruding corners]
—————————————————————————————————————————————————
A simple 2-part hidden book compartment, this model smoothly snaps together with a durable compliant mechanism.
For the cover especially, PLA or similarly stiff filaments will perform better than PETG & the like.
For best results, most of all if your print bed is not perfectly clean, a wide & strong brim and high plate temp are greatly beneficial. This is most crucial for the cover, as it is quite a tall print with a very small base.
On both parts can be found small salient/isthmus-like features—1- or 2-perimeter bridges—at the end of the bottom rails on the paper, and bridging the gap near the top of the cover. These are supplied to ensure print quality, and should be clipped off after printing.
All these considerations are mostly moot if you are a member of the clean plate club &/or do not have issues with adhesion.
Happy printing!
- the CAD Knecht