1 / 2
M3 Zip Tie (2.5mm) Loops
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple anchor for zip ties made for using on whenever you have an M3 bolt
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 20
- Makes
- 0
- Views
- 161
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Needed a zip tie anchor to organize a couple of wires for a toolhead board (EBB36). Has an 3mm hole to mount it wherever you have an M3 bolt and adds an anchor point for wires running in an axis parallel to the bolt.
Made with 2.5mm zip ties in mind.
I use 5 solid top/bottom layers to print these in ABS/ASA, so they are mostly solid. Should work with other slicer settings as well.