Jaguar Recurve Crossbow Triple Rail Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Jaguar Recurve Crossbow Triple Rail Mount adapter turns your single rail into three rails so you can pimp out your…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 29
- Makes
- 0
- Views
- 423
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Share Alike
Jaguar Recurve Crossbow Triple Rail Mount adapter turns your single rail into three rails so you can pimp out your crossbow with useful accessories. Its got holes for screws and things, but it should be a tight enough fit that you can just tap it onto the rail with a small hammer, this is assuming you have your printer dialed in appropriately of course. Probably best to print it in PETG some other suitable material, PLA does work also though. You will need to use supports under the central rail if your printing it flat on the bed and you may need to finish the inside of the rail slot with some hand tools.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
No
200
Infill:
20
Filament:
Prusa PETG
Notes:
0.2mm layer height, supports on bed, 0.4mm nozzle-x, 3 x walls and 6 layers top and bottom for good strength.
Category: Sport & Outdoors