Swebo/Wenger Scimitar Knife Sheath
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Standard Knife sheaths aren't big enough for the scimitar / butcher style knives so I made these custom shaped versions!
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 42
- Makes
- 0
- Views
- 416
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
Standard Knife sheaths aren't big enough for the scimitar / butcher style knives.
There are small and large versions of the STL as I have two different sizes. The Small version has two styles - an open back and a closed back. The closed-back may need a bit of filing to get the knife to fit snugly.
The open-back style is a loose fit so it's easier to put the knife away - I find the tight knife sheaths can be a bit too tight to take the knife out, making them a bit more dangerous.
If you want it tighter, you can scale the print accordingly.
I print these with in the upright direction and add support on the build-plate only for the front-edge.
Print in .2mm to get smoother curves.