1 / 3
XP Flexpower X7 PSU mounting tabs for The Rig
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting tabs for an XP Flexpower X7 PSU, to fit into The Rig.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 27
- Makes
- 0
- Views
- 323
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- GNU General Public License v3.0
These are mounting tabs for an XP Flexpower X7 PSU to The Rig.
This PSU is very large, and fills in the cavity in the middle almost fully.
I used 14" rails, unsure if it'll squeeze into the width of the stock 12" rails.
It can be inserted/attached after The Rig is built.
Print two of each, you'll need 2 M4 headsets and six M4 12mm SCHS.