Stackable Lego Storage Containers
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€7.40 – €9.05 net (excluding VAT)
For file: Lego-lid-16-stud-no-magnets_0.4n_0.2mm_PLA_MK4IS_5h44m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €8.23 excluding VAT (range midpoint).
- Weight reported by the author
- 155 g
- Print time reported by the author
- 5.73 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Stackable Lego storage contains that require no supports to print.
- Rating
- 4.5 / 5
- Likes
- 115
- Downloads
- 628
- Makes
- 4
- Views
- 2,384
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Stackable Lego storage boxes in 3 sizes. Two variations of each size exist, one with a space to insert magnets and one without. The magnets are small, inexpensive, and help keep the lid more secure but will work just fine without them.
Recommended Print Settings:
Default print settings will work just fine, however these are the settings that I personally used to print them. The included GCODE files for the MK4 will reflect these settings.
Layer Height: 0.20mm
Infil: 10% Gyroid
Permitters: 3
Solid Layers Top: 7
Solid Layers Bottom: 7
Supports: No
Most modern printers with decent bridging should not require any supports for either the box or lid when using PLA. However you can use supports on the bottoms holes if needed.
Magnets:
The magnets I used are 8x3x1 mm and can be sourced from Amazon. Magnets should be glued into place once printed.
Both STL and 3MF files included