Easy Clean Sink Strainer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Kitchen Sink Strainer with detachable blades. Easy Clean, Easy Print, and Easy Assembly!
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 22
- Makes
- 0
- Views
- 320
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Kitchen Sink Strainer with detachable blades.
Easy Clean, Easy Print, and Easy Assembly!
After designing my other sink strainers, I wanted to design one with much easier way to clean, so I came up with this strainer.
Note: Designed for 40 mm kitchen sink opening, with 30 mm depth!
To Assemble:
Just hang the 12 Blades to the Holder, insert the Screw to the Holder (add a drop of oil), screw it until it holds the Blades in place, and it's ready.
To Disassemble and Clean:
Unscrew the Screw until you can detach the Blades from the Holder, clean, and re-assemble again.
Printing:
| File | Qty |
| Sink Strainer Blde.stl | 12 |
| Sink Strainer Holder.stl | 1 |
| Sink Strainer Screw.stl | 1 |
For easier print, a ready prepared print layout STL of all the parts is also provided.
My print settings:
Filament: PETG (Recommended)
Nozzle: 0.4 mm
Perimeters: 5 (Recommended)
Infill: 15%
No Support.
I hope you like and share your make.
Happy Printing =)