Riichi Mahjong Compass
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.10 – €2.57 net (excluding VAT)
For file: Mahjong centre plate_PLA_0.3mm_1h32m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.33 excluding VAT (range midpoint).
- Weight reported by the author
- 46 g
- Print time reported by the author
- 1.53 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Compass or centre plate for riichi mahjong. Multicolour print.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 138
- Makes
- 0
- Views
- 1,535
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Share Alike
Compass for riichi mahjong. Slot is for standard scoring sticks (65 x 7 x 4 mm). Tiles on the picture are AMOS 28 mm (28 x 21 x 16.5 mm). You can make compass bigger or smaller depending on tiles you are using. Compass size is 130 x 130 x 5 mm.
This is multi colour print. Letters are only 0,2 mm deep, but you can also slice it with 0,3 mm layer height. I would recommend to print in grey (I didn't have it), because if printing in white riichi stick and compass are the same colour and you can easily forget to take the stick after the win.
Print settings:
- When importing 3mf or stl, make sure you “split to parts”. This will make it easier to do multi colour print.
- 0,6 mm nozzle with 0,3 mm layer height.
- 15% or more infill.
- 2 perimeters.
- 2 bottom, 4 top full layers
- Wipe tower - no sparse layers will purge some filament only on change. Tower height is 0,6mm (make sure you have enough clearance between nozzle and printed model).
- Try printing on rough surface. I printed on glass and the compass slides when there are only few tiles supporting it. It is stable after 1st line of tiles is filled.