1 / 3
623ZZ Bearing Pressfit tool for Prusa i3 MK3/S — image 1
1 / 3

623ZZ Bearing Pressfit tool for Prusa i3 MK3/S

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

623ZZ Bearing Pressfit tool for Prusa i3 MK3/S

Rating
0 / 5
Likes
2
Downloads
37
Makes
0
Views
487
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Why replace the entire idler for about $6 USD when you can buy a pack of ten (10) new bearings for about $10 USD and replace the bearing in the idler for $1 USD each time. This is setup for a Prusa i3 MK3/S's smooth idlers on the X and Y axis.

I found these bearings to work well and do not cost much.

XiKe 10 Pcs 623ZZ Double Metal Seal Bearings 3x10x4mm, Pre-Lubricated and Stable Performance and Cost Effective, Deep Groove Ball Bearings.

https://www.amazon.com/gp/product/B07JHT7D8R/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B07JHT7D8R&linkCode=as2&tag=mgresham-20&linkId=25b61097cd865ebdae4b6ffc0dd62a3a

See the pictures for the configuration for bearing extraction and insertion. Both can be performed by threading a 3mm rod through and compressing, or using a pressfit vise, or a small hammer. The key is printing the parts at 100% infill so they will not compress. Bearing insertion must press against the outer rim of the bearing to avoid damage. With bearing removal, it is not a concern since the bearing is old and will be discarded.