T Track Adapter for the Wolfcraft MASTER work 1600 Working Table

The Wolfcraft Master Work 1600 MFT Working Table is a competitively priced and well built MFT style work bench that has many pluses but one big minus in that it does not have a T Track slot like many other MFT work tables on the front and back.

You can find a review of the table and a follow up video on improvements on Peter Millard's YouTube channel:

a) https://youtu.be/3qCU8dzIJ_c?si=cQWuPHP1GDRsrFzK
b) https://youtu.be/pqy8IUnLDY4?si=CL77wTlVZ9gGwgGw

Along the front & back lengths it has a proprietary extrusion that makes it particularly hard to mount a standard T Track to be used for track clamps or a tracksaw hinge etc.

I designed an adapter for a 1m 8.3mm T Track set purchased from Rutlands (https://www.rutlands.com/products/t-track-8-3mm-pack-of-2?_pos=1&_sid=bc213249f&_ss=r) 

In order to fit a common sized printer I have segmented the adapter in 250mm lengths that are printed upright for 2 reasons: one to fit and second the parts are strongest in this orientation.

There are 3 designs: One is a standard block section and two are sections (a left and a right section) with a cutout to give more clearance along the cut line of the track saw.

With the 5 sections fitted along the side of the work table the track if fitted in the slot. 4mm holes are drilled through the printed parts and then the Wolfcraft extrusion. 

The track and adapters are thru bolted with  M4 X 30mm Hex Socket Countersunk Machine Screws ( Amazon: https://amzn.eu/d/6A9xa4B )

I used M4 washers and M4 nylon lock nuts to secure ( Amazon: https://amzn.eu/d/bbKQ744 )