1 / 1
Mercedes-Benz Citaro Bus Driver's Cabin Window Air Vent Cap — image 1

Mercedes-Benz Citaro Bus Driver's Cabin Window Air Vent Cap

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a friction-fit plug that prevents condensation from building up on the Citaro driver's side window

Rating
0 / 5
Likes
1
Downloads
19
Makes
0
Views
250
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — Share Alike

The Mercedes-Benz Citaro driver's cabin has 2 air-conditioning vents below the driver's side window that cause heavy condensation in humid, tropical weather. Over time, the fog of condensation creeps upward as the glass cools, obscuring the wing mirror and making the bus unsafe to drive.

The window has defroster wires that help to mitigate these, but if they are unserviceable, the only solution, other than wiping the condensation by hand, is to plug the air-conditioning vents.

This is a suitable friction-fit plug that looks much more elegant than just taping them over or stuffing the vents (which also risks damaging the fragile plastic in the vent).

Print Settings

Rafts:

No

Supports:

No

Infill:

100%/doesn't matter

Filament: eSUN PETG


Notes:

Thin enough that no infill is generated at 0.2mm layer heights, so infill setting should not matter.

PETG recommended as the tabs are friction fit; more brittle filaments e.g. PLA may break off and dislodge into the vents.

Category: Automotive

Tags