IDEX First Layer Calibration Multiple Bed Dimensions
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Test the z-offset of both hotends at the same time
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 37
- Makes
- 0
- Views
- 194
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
I looked on Printables and couldn't find any idex first layer calibration test, so I did it myself.
I created a lot of versions, since I know everyone has a different printer, specially if you built a custom Idex like myself.
In the picture you see my custom 210x160mm sparse version, which is close to the limit for my machine. You can find it outside of the main folders.
There are tho main types: dense and sparse. The first has a 10mm distance between the rectangles, while the second has 20mm spacing between them. This will determine the print time and the amount of area you test in one go, so you can choose which one you prefer.
If you need a specific dimension for the test, just write it in the comments and I will get back to you as soon as I can.
You can also try this alternative version: https://www.printables.com/model/872259-idex-first-layer-calibration-multiple-bed-dimensio
If this has been helpful to you, saved you some time or some money, please consider supporting me with a tip trough Ko-fi.