Macintosh AiO 9 Inch LCD Bracket Rev 4
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the Forth version of the Macintosh Plus or Macintosh All in One Bracket for 9 inch All in One Macintoshes.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 352
- Makes
- 1
- Views
- 1,415
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is the 4th Version of The Macintosh All in One LCD Bracket For 9 inch CRT replacement with an LCD screen.. This comes with all the 3d printed stuff need to actually Mount an LCD Screen. It is generic enough to support a 8-9 inch LCD Screen of most any brand.
This was done so that you have the freedom to choose your LCD Screen to save your old Mac or make an interesting project out of an Old Macintosh All in One Shell.
This started off with a simple bracket that made it so their was a flat mating surface for an lcd screen. But you had to figure out how to mount the screen yourself. Now you don't have to anymore.
Here is what you will need aside from the printed files… This is designed to be removable and reusable as such there spots for 4 threaded inserts. On to the BOM
- 4 M3 4mm Threaded inserts for 3d printing
- 4 M3 by 20 MM Screws
After you have all that you will put the threaded inserts into the 4 holes that have a raised ring around them. Not all LCD Screen so you have 4, 8, 12mm Spacers for this as well. The reason I used a M3 by 20MM screw is because it can bottom out with out touching the front of the Macintosh case.