Open source SpaceMouse - Mini-ish Remixed Parts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Updated parts to use heat sets and cross hatch bridges instead of sacrificial layers
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 92
- Makes
- 1
- Views
- 1,239
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I'm not a fan of screwing into plastic or sacrificial layers on holes. So I've updated the parts that would use these to use cross hatch bridging on holes that would use a sacrificial layer and where the bolt would screw into plastic, I have opened up the holes so Voron spec heatsets (M3x5x4) can be used.
The mounting holes for the joysticks on the frame have also been reduced to 1.9mm to allow for the use of M2x8 Flanged Pan head self tapping screws or these with an M2 washer.
In order for the cross hatch bridging method to work, these parts must be printed at 0.2mm layer height.
CHANGELOG
v2.5 - Initial Release
v2.5.1 - Enlarge holes for screws in base in the frame so it no longer screws into plastic when using screws over 8mm long