FLY SHT 36 with PG7 gland for ORBITER 2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted to use an IGUS Canbus cable with my Orbiter 2. I merged this with https://www.printables.com/model/760030-ebb3
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 41
- Makes
- 0
- Views
- 529
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
UPDATE: I found that over time, the strain on the PG7 mount from the thick IGUS cable can cause the mount to break. Use this if you have a cable that is not as stiff as my CF113-018-D cable. I need this cable because i want the 20 awg wire for power to 110 w rapido.
You may not have this problem if you can get away with a smaller cable.
Print using voron settings.
My plan is the use the FLY SHT connector and route it to the pg7 to an igus cable instead of using the cheap cable ( untwisted ) that came with flyshit 36.