Volvo V70/S70/XC70 etc generation 1 (1997-2000) internal door handle fix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This piece of plastic holds the cable to the door handle when the original plastic has broken.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 55
- Makes
- 0
- Views
- 755
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
The cable from the internal door handle to the latch can break, and the part is no longer available (the cable for generation 2 seems to still be available).
This guy made a fix with some cable ties:
and I actually think it is a good and likely lasting fix.
I have however - anyway - made this model, which can clip in on the door handle mechanism and holds the cable in place.
I've printed it in PETG, but I assume that ABS and PC will also work.
I wouldn't use PLA, since cars can get warm in the sun.
This version is for the front right door. If you need for the left side, just mirror it before printing.
I've included the Fusion 360 file, in case you need to make small adjustments if you cable has broken in a different manner.