1 / 7
Medline and Universal Wheelchair Clamp for Cupholders and Phoneholders — image 1
1 / 7

Medline and Universal Wheelchair Clamp for Cupholders and Phoneholders

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

3D printed clamp with dovetail that can be used to attach accessories to wheelchairs, strollers and walkers.

Rating
5 / 5
Likes
59
Downloads
457
Makes
2
Views
2,794
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

A 3D printed clamp by AmptUp.org, that fits a standard Medline wheelchair and can also be clamped to most pipes for wheelchairs, strollers and walkers, vertically between 1/2in. to 1 1/4in. in diameter. It has a dovetail receptor for attaching accessories and you can find our phone holder and cup holder here on Printables, or contribute to helping those with disabilities by purchasing one at AmptUp.org.

It is 1.5in high x 1.53in wide x 2.2in long. Our wheelchair clamp system with dovetail receptor allows you to mount our modular wheelchair cupholder or modular wheelchair phone holder and other accessories onto your wheelchair, walker or even crutches.

For Hardware we used a M3 x 40mm hexagon cap screw on the side with a M3 nylon lock nut and for the vertical we used a M3 x 35mm Flat Head Socket Cap Screw that counter sinks inside the bottom of the print with an M3 nylon lock nut to secure it.

I typically print this at 100% infill so it is as tough as possible and can hold heavier cups and attachments. Also, the top looks much cleaner if you print the clamp upside down (or at least it does on my printer). Lastly, if you'd rather support those with disabilities and amputations, you can purchase these at AmptUp.org.

Tags