Desalvo Galactic 80mm Fan Shroud
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An 80mm fan shroud for the Desalvo Systems Raspberry Pi5 Galactic case.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 154
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Simple 80mm fan shroud for the Desalvo Systems Pi5 Galactic case. The top has an edge that almost snaps over the heat sink fins.
A version with and one without clips on the side incase worried with side mounting.
I needed some supplemental cooling as my print area can get 47C at times.
Sample photos printed in Hatchbox Transparent Black ABS, standard 2 walls basic print. Used manual selection tree support for the tabs when printing clips version.
Pinout for Fan, JST-SH 1.0 4Pin
Noctua - https://noctua.at/pub/media/wysiwyg/Noctua_PWM_specifications_white_paper.pdf
Green , Black , Blue , Yellow (inside pin)
Tach , GND , PWM , +5V
PI5 Cooler - https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#pinout
Yellow , Black , Blue , Red (inside pin)
Tach , GND , PWM , +5V