1 / 5

Lamp Base #5

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Sink

@gary_sinkowitz

A curved tall general purpose stand for an e14 socket.

Rating: 0 / 5
Likes: 6
Downloads: 46
Makes: 0
Views: 284
Reviews: 0

Updated at source: May 19, 2024

Model information

Source: Printables
Category: Home Decor
License: Creative Commons — Attribution — Noncommercial

Details Files (2)Makes & comments (Makes: 0) (Comments: 0)Remixes (0)Collections (16)

A tall shaped general purpose stand for a lamp using an e14 socket. Can be used for a lamp shade with a circular opening between 29 and 36 mm. The shade is secured with an e14 collar.

The weighted base is secured using inserts and then the nuts are glued into place. The base weighted base is attached to the neck with 3 - M3 by 20mm screws.

Supports are required to print the Pole Neck.

Manual supports were painted on to support underside lof the base where the inserts are to be melted into place. See image.

The fassung-lamp socket ( e14-28 mm):
https://www.amazon.de/dp/B097K4YNL9

The electrical cable and switch:
https://www.amazon.de/dp/B002DAOX58

The E14 Bulb used here:
https://www.amazon.de/dp/B0B5MPL9MX

3 x M3 by 20 mm Screws

https://de.aliexpress.com/item/32443118299.html?

3 x M12 Mutter (Nut for weighting)

https://www.amazon.de/dp/B01M30BU88?

3 x M3 Inserts

https://www.amazon.de/dp/B08BCRZZS3?

The map shade used here is: