FGC-68 UNW 14inch LB M
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
this is the shroud set based on the FGC-9 shroud models. but these are modded to accept paintball barrels. in this…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 20
- Makes
- 0
- Views
- 143
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution
this is the shroud set based on the FGC-9 shroud models. but these are modded to accept paintball barrels. in this collection is a set of different shrouds. in STL and STEP format, so you can customise the look of your marker.
to complete this build do you need to use the FGC-68 set and part of the FGC-9 and parts of the Tippmann Tipx marker
if you see other models of FGC-9 shrouds these can me modded to fit on a FGC-68 the only difference is that the hole for the barrel is bigger. so this could be drilled, cut, or melted away with a soldier iron.
keep in mind that you will need a LONG key to install this shroud.
and since this is the one piece version. a big printer to print this shroud
How do I assemble the FGC-68?
for parts look at the parts list PDF that can be found in the FGC-68 starter kit
to actually see how to do it whats this link.
https://youtu.be/M\_1AAlgVm-4
some tips disassemble the FGC68
a introduction to the FGC68
a playlist to relevant things for the FGC68.
https://www.youtube.com/playlist?list=PLVTi8DENyyvxTFzWGHSCEAj-XqR4OtClv
The FGC-68 in action
Category: Sport & Outdoors