1 / 3
MTB Handlebar extenders
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you cut your handlebar too short these should do the trick up to a total increase of 40mm.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 38
- Makes
- 0
- Views
- 307
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Print with 4 walls @ 215c with PLA for best layer adhesion. 25% infill gyroid.
I have tested these to be an extremely precise fit with my ender 3 v2 to some ebay carbon fibre bars, I also made another version fitting to a common ID on aluminum bars, you will find that version with an "ALU" in the file.
The ID for alu is 19.8mm and for carbon its 18.2mm. Make sure to check before fitting, The clearance I left is 0.2mm, if your printer can get cleaner dimensions you can decrease it.