1 / 6
Topdon TC001 TC002 thermal camera lens mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Macro lens mount for Topdon thermal camera. A 20 mm lens can be attached and varied in focal distance.
- Rating
- 5 / 5
- Likes
- 43
- Downloads
- 305
- Makes
- 6
- Views
- 1,621
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Topdon TC001 and TC002 thermal camera lens mount

Rasperry pi, left: with macro lens 76.2mm, right: without (both images scaled and cropped to show the approx. the same excerpt. The closest distance where the image was as sharp as possible was chosen each)
- Allows for mounting a PVD lens with a diameter of 20mm
- Focal distance can be varied by a thread
- A ¼" camera mount allows for a tripod attachment
- Inspired by https://youtu.be/wG1JiTR00H8
- Have a look here for using the camera at a computer: https://github.com/leswright1977/PyThermalCamera/
Lenses:
- You need special lenses that are transparent for infrared radiation
- A focal length of 76.2 mm is known to work for macro imaging (see comparison image)
- You can get a lens here: https://www.aliexpress.com/item/1005005426131784.html , choose 20mm diameter and e.g. 76.2 mm focal length USA ZnSe or China PVD
Printing:
- Print all three parts
- 3 Perimeters
- I used ASA for long lasting “springy” elements, but PLA and PETG were reported to work well, too.
- Clearances are a thing here, so have your printer tuned in
- Freecad file is attached, you can relatively easy change dimensions.
- The middle tube snaps into the enclosure part.
- Snap the lens into the lens tube.
- Screw the lens tube into the middle tube.