Bosch Readyy'y Serie 2 Vacuum Cleaner Nozzle Attachment Holder Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount to hold the stick vacuum nozzle to the body when not in use
- Rating
- 4 / 5
- Likes
- 8
- Downloads
- 67
- Makes
- 1
- Views
- 729
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Designed for the Bosch Readyy'y Serie 2 Vacuum Cleaner
It holds the Stick Vacuum Nozzle to the main body of the vacuum when not in use
Model is positions in the suggested print orientation (at 45deg)
No additional hardware required. It uses the existing screw to hold the mount
Would recommend printing with an Outer brim (I used 3mm) to assist with bed adhesion [my first print failed around 60%]. I did not need any other Supports
Install Instructions
- Unscrew the bolt holding the handle to the body
- Insert the bolt through the hole in the print
- Gently, begin re-screwing in the bolt into the handle, being careful not to push the nut out
- Once bolt has started threading onto the nut, tighten as normal
OnShape Link
https://cad.onshape.com/documents/340cc6716c6af4a6756bd7bc/w/4865a275a617a0469d67928c/e/2157fef296a26a99bcee8565?renderMode=0&uiState=66435ed782fb35015b9b73ab