Scout's 'SmolStop' Hand Stop
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Short handstop that requires 1 T-Nut to fasten to MLOK and guides your hand to an indexed area on your handguard.
- Rating
- 4 / 5
- Likes
- 36
- Downloads
- 452
- Makes
- 1
- Views
- 1,574
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Scout339's 'SmolStop' Hand Stop, inspired from Driven Arms ShortStop.
Requires 1x T-Nut for MLOK.
For duty-grade strength, I recommend 6 walls and 50% infill. I've tested it with ASA, but PLA+ and PETG should also work. Filled Nylon (and PET-CF, but I haven't tested that enough) will be even stronger.
you can orient the print any way that makes sense, but I've printed with MLOK slots facing the build plate (upside-down) or at a slight angle.
Fuzzy Skin Settings used in second picture are as follows:
0.1mm layer height
0.2mm thickness
6mm density