Dust and sawdust exhaust - quick coupler
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It allows the exchange of various suction hoses according to the tools.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 23
- Makes
- 0
- Views
- 249
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
Consists of D50 flange and D50 bushings.
There is a 52 x 3.5 o-ring in the flange, it may need to be sanded down slightly for easy insertion of the flange into the housing.
The case is glued together from two parts. Other parts are assembled without gluing and hold reliably.
A D50 pipe and a reduction for a D32/40 vacuum cleaner hose are inserted into the cases.
It follows the terminal at the address: https://www.printables.com/cs/model/868768-dust-and-sawdust-exhaust-terminal , where the same flange is.
PLA
Nozzle - 0.4
Layer - 0.2 SPEED
Fill 15%
Supports in the groove
Brim (Pouzdro 2)