1 / 5
Elecrow 5 Inch Display Housing (RC050S)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A housing for the Elecrow 5 inch RC050S display compatible with Raspberry Pi installed behind. Standoffs not included.
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 284
- Makes
- 2
- Views
- 1,577
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
A housing designed for the Elecrow 5 inch RC050S display which is compatible with a Raspberry Pi installed behind, depending on the standoff length used.
**M3 STANDOFFS REQUIRED**
A standoff length of 25mm is enough clearance for a Raspberry Pi 5.
Personal standoff setup:
- 4x M3x10 male-female
- 4x M3x15 female-female
- 8x M3x8 pan head Phillips screws
Backplate Design
- Vent dimensions are compatible with 4010 fans
- M4 keyhole mounting following system 32 specification horizontally
- Cutout for GPIO pins
- Keyhole dimensions:
- 4010 fan dimensions referenced:
