Hamster threaded box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a cute fat hamster with some space inside! Use it as a gift box or hide your favourite candy inside :)
- Rating
- 5 / 5
- Likes
- 112
- Downloads
- 606
- Makes
- 4
- Views
- 1,742
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
Just a cute fat hamster with some space inside! Use it as a gift box or hide your favourite candy inside :)
Print in place, no supports. You can print both parts at once.
Scaling: Don’t forget to scale both parts equally. There is enough tollerance for the thread to work fine. I recommend at least 50% size, but I tried 40% and it worked too. The yellow hamster on the picture is about 55mm high, with scaling down to 55%.
If you want to use my print settings, use the provided 3mf file. I printed it on Prusa Mini (with PEI satin sheet) without any issues.
You can use the “paint seam” tool in PrusaSlicer to paint the seam on the back, or use the settings (seam position: Rear).
There are 2 options for the bottom part.
- with the feet - I don’t guarantee that the face will be aligned parfectly with the feet - depending on the printer and size (and how strongly you close the thread), the feet might be a little bit on the right/left side
- without the feet - if you cannot stand the fact in point 1., print it without the feet, there’s nothing to align :)
Layer height: For the smallest one (40% scale) I used 0.1 mm layer height. For bigger ones (50% and bigger) I used 0.15 mm.