1 / 4
BentoBox Tray for Qidi X-Plus 3
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allow the BentoBox for Qidi X-Plus 3 with more support.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 24
- Makes
- 1
- Views
- 338
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This BentoBox tray only works for the Qidi X-Plus 3. It relies on resting on one of the edges of the plastic frame.
Recommendations
- Print with ABS or ASA
- Enable brims
- wall loops: 3
- 0.4 nozzle
- 100% infill
I used velcro tapes for easier maintenance.
The additional BentoPlate part is to shim the bentobase higher. Depending on the thickness of the adhesive tape used, this part is optional. I superglued the plate to the BentoBox base. Another reason for the plate is that the area was wrapped when I printed the BentoBox base with ABS.