(Un)original Prusa Drybox REMIX
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€6.59 – €8.06 net (excluding VAT)
For file: Beam G1G2_Humidity_1_0.4n_0.2mm_PLA_MK4IS_5h24m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.32 excluding VAT (range midpoint).
- Weight reported by the author
- 132 g
- Print time reported by the author
- 5.39 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Remix of parts G1 and G2 for hygrometer with thermometer.
- Rating
- 4.818 / 5
- Likes
- 34
- Downloads
- 192
- Makes
- 13
- Views
- 1,280
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
In the original design, the opening for the hygrometer with the thermometer is very inclined.
Due to the large tilt, the display is almost unreadable when the box is placed high. Now the display is beautifully readable even when the box is placed high. In my case, the display is at a height of approx. 185 cm.
I used the following settings for all parts:
Perimeters: 3
Infill: Gyroid
Infill density: 20%
UPDATE 29/12/24
- Added stl file of simple hook to fix open door.
- An M3x6 screw is ideal for connecting the hook and holder.
- The hole on the top of the drybox is used to attach the holder itself with a hook to the drybox. An M3x12 screw is used here.
UPDATE 24/3/25
- Added stl file of simple hook to fix open door in 10cm length.