Any-Size Plant Pot Bottoms
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These inserts go in the bottom of pots with no drainage holes to allow extra water to sit and prevent root rot.
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 69
- Makes
- 1
- Views
- 441
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This pot bottom replaces gravel/rocks in the base of a plant pot, but is intended to reduce the risk of root rot all the same.
With the STL you can easily resize this part's diameter to any pot you wish. I typically use ~1 cm height but it can be made to provide as much clearance from the bottom of the pot as you like. I recommend doing this in your slicer rather than a CAD program as it's simpler.
Print slow on the first layer to ensure all the tight lines are printed properly. High bed adhesion is recommended.
Fusion file upload as per request!