50mL Test Tube Rack (3x3)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.93 – €3.58 net (excluding VAT)
For file: TT Rack Complete_0.3mm_PLA_MK3S_2h57m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.26 excluding VAT (range midpoint).
- Weight reported by the author
- 47 g
- Print time reported by the author
- 2.96 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
The model has been sized to print all parts on one print bed (MK3S+). This will hold nine, 50mL centrifuge tubes.
- Rating
- 5 / 5
- Likes
- 51
- Downloads
- 265
- Makes
- 5
- Views
- 1,012
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Chemistry & Biology
- License
- Creative Commons — Attribution
The goal was to make a test tube rack that could print on one print bed (MK3S+) to use for our lab. The commercially available options are too expensive for what they are.
This is easy to assemble with just a pair of pliers, pressing the clips into the slots on the side prints. Take care to align the sides such that the ‘shelf’ in the slot is oriented to the outside of the rack. The spacing allows for up to nine, 50mL centrifuge tubes to be placed with a little wiggle room.
A .gcode file is available with all parts in PLA, which is the majority of the ones printed for our lab.
Consult a chemical compatibility chart for the appropriate material for your laboratory use. Our lab uses PLA and PETG.