Tetrix MAX All-Terrain Wheel Hub
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A better wheel hub for the Tetrix MAX all-terrain tires.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 29
- Makes
- 0
- Views
- 405
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
I don't like the wheel hubs that come with the Tetrix tires, in my opinion they have too much flex due to a lack of support from the axle. To alleviate this, I designed a hub that an axle can pass completely through, as opposed to being stopped halfway like the original. There is space for a bushing on both sides and mounting points for the Tetrix axle hubs.
I have included two different versions: one with built in supports, and one without. For the life of me I could not manage to delete the bulk of supports generated by PrusaSlicer, so I created supports within the model in the only spots necessary. These supports are designed to be clipped out with filament snips, and use much less filament than generated supports.
Print Settings
- 0.2mm Layer Height
- 15% Gyroid infill
- PETG