1 / 7
SKOUT Epoch Bag Rider
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bag rider for the SKOUT Epoch
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 39
- Makes
- 0
- Views
- 410
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Bag rider for the SKOUT Epoch which utilises 4 holes under the rear stock.
As with all 3D printed holes, much is depended on your printer/filament settings and how good your printer is tuned but there should be enough space for a ¼"-20 screw to pass though the holes no matter how low print quality is.
You will need 4 ¼"-20, 25mm (1") long screws
Whole setup is quite sturdy and stable
I've used PLA but for durability outside I would recommend ABS, ASA or PETG for higher temperature resistance in the sun.
Print in upright orientation with support from build plate only