Swiveling Direct Drive Filament Guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I converted my Ender 3 over to a direct drive system and rotated my spool holder 90 degrees. I wanted to take a stab…
- Rating
- 5 / 5
- Likes
- 64
- Downloads
- 489
- Makes
- 9
- Views
- 2,374
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I converted my Ender 3 over to a direct drive system and rotated my spool holder 90 degrees. I wanted to take a stab at designing a filament guide that was print-in-place, but had a dynamic swivel component.
Hole in the swivel is designed to accept a small length of PTFE tube at the top. It's intentionally tight to get a good friction fit.
Mounts with 2xM4x8 bolts and 2xM4 hammer nuts to fit into the 2020 extrusion.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
No
Supports:
No
.2
Infill:
15
Filament:
IIID MAX PLA+ Orange
Notes:
I used PrusaSlicer and enabled Elephant's Foot compensation. The first layer needs to be as exact as possible so that the model doesn't fuse together. Your printer's extrusion rate should be well calibrated.
Category: 3D Printer Parts