Improved Fire Alarm Pull
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
CoolNamesAllTaken did a great job designing this piece, but I didn't need it as a light switch-- I needed it for a…
- Rating
- 5 / 5
- Likes
- 40
- Downloads
- 502
- Makes
- 3
- Views
- 2,448
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution
CoolNamesAllTaken did a great job designing this piece, but I didn't need it as a light switch-- I needed it for a little boy that wanted one as a toy. The tolerances on the original were WAY too tight, and if the piece isn't mounted on a light switch, then it doesn't stay together. I needed it to slide freely and not come apart.
I adjusted the slide to have more clearance to fit in the body. I also added a channel on one side and a hole for an M3x16 screw on the body to lock the slide into the body. A cap head M3 bolt should thread into the hole.
If you would still like to mount it to a wall, I would recommend doublestick tape or 3M Command strips.
Print Settings
Printer:
Artillery Genius
Rafts:
No
Yes
Resolution:
0.2mm
15%
Filament: IIID MAX PLA+ Red/White
Notes:
Printed the base and slide in red, with a filament swap to white for the lettering.
Supports are required on both parts for the grooves and inserts.Category: Interactive Art