Curved Test Cube
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A standard test cube with curved corners for calibration.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 103
- Makes
- 4
- Views
- 331
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this model for You if Your printer does not support the Linear Advance function, but You want to print with correct sizes.
One of my printer does not support it, and all of the printed test cubes are difficult to measure because the corners bumped out.
So, I exported a test cube from Cura plugin for calibration, and I modified it the corners. It is good for calibration but not only the sizes:
Warning: If the model buttom corners are not printed, your nozzle is too close for the bed!
(I learned it form the Benchys buttom text.)
Size: 20x20x20 mm
print time with 60 mm/s 29 min (plus heating)