Roxtec EZENTRY 10 Layout Template
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Layout template for Roxtec EZENTRY 10 electrical panel bulkheads
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 117
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
This is a layout template for Roxtec EZENTRY 10 electrical panel bulkheads.
I had a recent project that involved cutting openings in a bunch of electrical panels and got tired of laying them out by hand. This was my solution! There are cavities for 12mm x 3mm round magnets, with a pilot hole for an M3 x 4mm flathead screw, under the faux bolt heads. The magnets are not strictly necessary, but they do make positioning a lot easier!
Check out one of my other designs, "Bolt Head Fridge Magnet", based on the original magnet stanchions for this project.
Please Comment, or post a Make or a Re-make! Thanks!
Markings and Bolt Heads
To get the raised copper markings and silver bolt heads required two filament changes. I started with Black Silk, which I swapped for Copper Silk at layer 9 (assuming a .2mm layer height), then switched to Silver Silk at layer 11.