1 / 5
Gratkit Firefly Wall-Mount (Filament Dryer)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall-Mount for the Gratkit Firefly Filament Dryer.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 37
- Makes
- 1
- Views
- 310
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Wall-Mount for the Gratkit Firefly Filament Dryer.
There are two version for mounting on the left or right side.
I printed the parts in Prusament PETG Jet Black with the default 0.2 Speed Profile.
To mount the bottom parts to the wall I used 3,5mm screws. To put the two pieces of the wall mount together I used brass inserts and M4 Screws.
Parts List:
- Print (Example for the left sided mount)
- 1x LEFT-Gratkit_Back
- 1x LEFT-wallmount_back
- 1x LEFT-Gratkit_front
- 1x LEFT-wallmount
- 6x M4 Brass inserts (3 per wallmount)
It should probably work with two screws per part as well, but I did not test this - 6x M4x16 Screws
- 6x M3,5 screws for the wallmount