1 / 4
Resident Evil - Umbrella Corporation keychain
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Resident Evil - Umbrella Corporation keychain designed in Oneshape.
- Rating
- 5 / 5
- Likes
- 82
- Downloads
- 591
- Makes
- 2
- Views
- 1,603
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution
Dimensions: 35x35x3 mm
Print time is more or less around 24m at 0.16 layer heigh (0.4 mm nozzle).
Print time is more or less around 32m at 0.12 layer heigh (0.4 mm nozzle).
Print parameters:
- Layer height - 0.16 mm or 0.12 mm
- Perimeters - 3
- Infill - 10%
- Brim - NO
- Support - NO
- Raft - NO
- Filament type - PLA or any
Could be printed in multicolor without MMU, AMS or similar.
For multicolor print start with BLACK:
When printing at 0.16 layer height:
- put the printer in Color Change mode(G-code M600) at layer 16 and then change filament with WHITE;
- put the printer in Color Change mode(G-code M600) at layer 17 and then change filament with RED
When printing at 0.12 layer height:
- put the printer in Color Change mode(G-code M600) at layer 20 and then change filament with WHITE;
- put the printer in Color Change mode(G-code M600) at layer 22 and then change filament with RED