1 / 2
Vertical Hydroponic Tower- 2 inch Netpot Mounts
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Netpot holder for 2in Netpot. Designed for 3x4 IN gutter downspouts.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 85
- Makes
- 0
- Views
- 783
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this to be mounted onto a 3IN x4 IN Gutter Downspout. You will need to separate 2x rectangular (1.5in x2.5in) hole cutouts by a minimum of 3.5 inches for there to be enough clearance between each netpot holder (see pic). If you are using a downspout extension (24in) measure 1.75in from the top front/bottom back to allow clearance for a downspout connector) and a mounting bracket.
Use clear exterior silicon to mount to gutter. I recommend scuffing the flat side of the holder first for extra adhesion.