Vertical Hydroponic Tower- Array Outlet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Funnel between vertical hydroponic tower and drain canal.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 30
- Makes
- 0
- Views
- 396
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This outlet is connected at the bottom of the tower. It connects the tower to your drain canal that runs back to the nutrient tank. Print this part with the wide opening face up. This was designed based off a 2 in. x 3 in. White Vinyl Downspout Connector, so the connection will be very tight and will require you to bend in the corners of the aluminum downspout to fit properly.
For installation, you should cut a 1.5in x 1.5in hole in your drain canal to allow for installation tolerance and an easy fit. The flange on the bottom of the outlet funnel does not have to be caulked or mounted to the drainage canal. If you do not mount it to the drainage canal (horizontal blue extrusion in images), you can adjust the canal to a custom angle depending on how many towers you have to allow the nutrients to gravity feed back into the nutrient tank. This component is not recommended for single tower setups.