Sliding belt tensiones for Mercury One.1 ZeroG
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sliding tensioners to easily and quickly adjust the belt tension without having to unscrew the main tensioning tower.
- Rating
- 0 / 5
- Likes
- 55
- Downloads
- 215
- Makes
- 0
- Views
- 1,934
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Sliding tensioners to easily and quickly adjust the belt tension without having to unscrew the main tensioning tower.
The main body is fixed to the frame while the tension can be adjusted by the 20mm M3 screw in the middle and the spring is responsible for containing the rebound that can occur in the belt due to the movement of the machine.
The spring goes between the sliding tensioner and the cap working as a spring loaded screw (20mm M3).
The 5mm dowel pins must be shortened to 23.5mm.
Necessary hardware:
- M3 8mm (cap head) x4
- M3 20mm (cap head) x2
- M5 12mm (cap head) x4
- M3 heat inserts (L 4mm x OD 5mm) x6
- M3 washers (7mm x 0.5mm) x6
- M5 T-nut x4
- Springs (diameter 8mm x long 15mm x thickness 0.9mm)
The print settings are the same as what zerog recommends
Category: 3D Printer Parts
