Customizable Parametric TV Remote Stand
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.45 – €0.55 net (excluding VAT)
For file: TV remote insert_0.4n_0.2mm_PLA_MK4IS_22m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.50 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 22.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
TV Remote stand that is customizable. You can enter the parameters for the sizes of your remotes.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 77
- Makes
- 0
- Views
- 544
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is inspired by H3li0's TV remote stand. I needed something different to fit the remotes that I have and I also wanted to make it parametric so people could enter in the size of their remote and print out the appropriate insert. The stand prints on it's side with Snug supports which pop right out. Everything else prints with no supports. I printed with 2 perimeters, printing with more perimeters may effect the fit of the inserts, I wanted to maximize the size of remote. In Fusion you can change the width and height of any of the inserts. TV remote has an additional bottom width in case the shape is not rectangular like mine. Makes and Comments Appreciated! Happy Printing!